Uniform heating of a plane stress plate: heatedPlatePlaneStress
Prepared by Philip Cardiff
Tutorial Aims
- Demonstrate a thermo-elastic analysis in plane stress;
- Verify the thermal stress of
thermoMechanicalLawin plane stress against the analytical solution.
Case Overview
A \(1 \times 1\) m plate is heated uniformly from the stress-free reference temperature \(T_0 = 300\) K to \(T = 400\) K. The plate is linear elastic, with \(E = 200\) GPa and \(\nu = 0.3\), and its coefficient of linear thermal expansion is \(\alpha = 10^{-5}\) K\(^{-1}\). The case is two-dimensional and solved under the plane stress assumption (planeStress yes; in constant/mechanicalProperties), on a mesh of \(10 \times 10\) cells.
The thermalLinearGeometry solid model is used. The temperature is \(T = 400\) K initially and on the right and top edges, so the steady temperature field is uniform. Thermal inertia and gravity are neglected, and one loading increment is used.
The left and bottom edges are symmetry planes, which remove the rigid-body motion, and the right and top edges are traction-free, so the plate is free to expand.
In plane stress, the thermal stress of an isotropic linear elastic material is
\[\boldsymbol{\sigma} = \frac{E}{1 - \nu^2}\left[(1 - \nu)\boldsymbol{\varepsilon} + \nu\,\text{tr}(\boldsymbol{\varepsilon})\boldsymbol{I}\right] - \frac{E\alpha(T - T_0)}{1 - \nu}\boldsymbol{I}\]for the in-plane components. A free plate is therefore stress-free, with the displacement \(\boldsymbol{u} = \alpha (T - T_0)(x, y)\), and a clamped plate has \(\sigma_{xx} = \sigma_{yy} = -E\alpha(T - T_0)/(1 - \nu)\).
Running the Case
The tutorial case is located at solids4foam/tutorials/solids/thermoelasticity/heatedPlatePlaneStress. The case can be run using the included Allrun script, i.e. > ./Allrun. The Allrun creates the mesh using blockMesh (> blockMesh), after which the case is run with the solids4Foam solver (> solids4Foam).
Expected Results
The plate expands without stress, and the displacement at the top-right corner is \(\alpha (T - T_0)(1, 1) = (10^{-3}, 10^{-3})\) m.
In plane stress, only the in-plane components of the stress and strain are meaningful: the out-of-plane components are not post-processed, so they are not the zero stress and the free out-of-plane strain, and should be ignored. For this reason, the Max sigmaEq printed in the log is not zero: it comes from \(\sigma_{zz} = -E\alpha(T - T_0)/(1 + \nu)\), about 154 MPa, while the in-plane stress is zero.
Regression Testing
The regressionTest.sh script runs the case as it is and checks the displacement against the analytical solution. It then runs it again with the right and top edges clamped, and checks the stress against \(-E\alpha(T - T_0)/(1 - \nu)\). Both checks failed before the plane stress thermal stress was corrected (#137), when it was \((1 + 2\nu)/(1 + \nu)\) times too large.
./regressionTest.sh